- AIM Sports
- AirForce Airguns
- Big Joshy Swimbaits
- BKL Scope Mounts
- Browning Trail Cameras
- Burris Optics
- Celestron
- Cupped Waterfowl
- Daiwa
- Dead Ringer
- DNZ Scope Mounts
- EGW
- Evergreen Baits
- Fenix Flashlights
- Full Moon Optics
- Fulton Flashlights
- Gamakatsu
- Harris
- HIVIZ Sights
- Holosun
- INTEGRIX
- Kopfjager
- Luna Optics
- Moultrie
- NcSTAR
- Reaction Tackle
- RedRing Shotgun Sights
- SiteLite
- SPRO
- SRM Knives
- Talley
- Tech Sights
- The Grind
- UTG
- VISM
- Warne
Warne HyperLite Scope Rings
Warne HyperLite scope rings deliver lightweight strength for hunters and shooters looking to reduce rifle weight without sacrificing a secure optic mounting system. Manufactured from Warne's proprietary MagnaFusion alloy, HyperLite rings are designed to weigh approximately 35% less than traditional aluminum scope rings.
HyperLite rings feature an integrated recoil lug, dual-screw clamps and a precision-machined construction with a protective Cerakote finish. Their STANAG 4694 interface is designed to provide rigidity and repeatable mounting. They fit Picatinny and Weaver-style cross-slot bases and are available for 1-inch, 30mm and 34mm scope tubes in low, medium and high configurations.
Choose Your Warne HyperLite Ring Size
Select rings based on your scope's main tube diameter, the required mounting height and your firearm's base or rail. Warne HyperLite rings are available in three tube diameters and three height options.
Use the part number and height chart below to identify the correct HyperLite configuration. The listed height measurements are the product height specifications shown for these rings; they should not be confused with the base-to-scope-tube Ring Height (RH) measurements used in Warne's traditional Maxima ring chart.
Warne HyperLite Scope Ring Part Numbers and Heights
| Part Number | Scope Tube Diameter | Ring Height | Height | Finish |
|---|---|---|---|---|
| 8500M | 1 inch | Low | 0.775" | Matte Black |
| 8501M | 1 inch | Medium | 0.900" | Matte Black |
| 8502M | 1 inch | High | 1.050" | Matte Black |
| 8513M | 30mm | Low | 0.865" | Matte Black |
| 8514M | 30mm | Medium | 0.990" | Matte Black |
| 8515M | 30mm | High | 1.140" | Matte Black |
| 8520M | 34mm | Low | 0.950" | Matte Black |
| 8521M | 34mm | Medium | 1.070" | Matte Black |
| 8522M | 34mm | High | 1.220" | Matte Black |
Lightweight MagnaFusion Alloy Construction
Warne developed its MagnaFusion alloy for shooters who want to reduce the weight of their optic mounting system. HyperLite rings are advertised as approximately 35% lighter than conventional aluminum rings while retaining the strength needed for demanding shooting applications. Their lightweight construction makes them particularly useful when building a hunting rifle where reducing overall carry weight matters.
Secure Mounting for Picatinny and Weaver Bases
HyperLite rings use an integrated recoil lug and dual-screw clamping system to secure the rings to the mounting rail. The STANAG 4694 interface is designed to improve rigidity and repeatability. These rings fit both Picatinny and Weaver-style bases, with Warne recommending full-width cross-slot mounting surfaces for best results.
Find the Correct Scope Ring Height
Choosing the correct ring height requires more than matching the scope tube diameter. You also need to account for the objective bell, barrel clearance, mounting rail and the position of the scope on the rifle. A ring that is too low may interfere with the objective housing or barrel, while unnecessarily tall rings can raise the scope more than needed.
For additional help understanding Warne ring height measurements and selecting the appropriate configuration, read our Warne Scope Ring Height Guide.