FREE SHIPPING on all US orders over $100!

Same day shipping on orders placed before 3PM Eastern, Monday through Friday

Warne Scope Ring Height Guide: How to Choose the Correct Rings

Choosing the correct scope ring height is important for proper scope clearance, a comfortable shooting position, and a secure mounting setup. Warne manufactures scope rings in several heights, tube diameters, and mounting configurations, including fixed and quick-detach models. The correct ring depends on your firearm's mounting system, scope tube diameter, and the clearance needed between the scope and the firearm.

This Warne scope ring height guide explains how Warne measures ring height, lists the published heights and part numbers from its ring chart, and helps you identify the ring style that matches your setup.

Understanding Warne Scope Ring Height

Warne measures Ring Height (RH) from the top of the scope base, or the top of an integral dovetail, to the bottom of the scope tube. This is an important distinction because the published measurement is not the overall height of the ring and is not the distance from the top of the receiver to the center of the scope.

Warne's published ring height is useful when selecting rings, but the measurement must be considered alongside the firearm, mounting base, and scope dimensions. A ring that works with one mounting system may not be suitable for another, even when the listed height is similar.

Warne Maxima Ring Height Chart

The Warne Maxima ring chart includes fixed and Quick Detach (QD) rings for 1-inch, 30mm, and 34mm scope tubes. The following table lists the standard Maxima heights and corresponding part numbers shown in Warne's chart.

Ring Height 1-Inch Tube 30mm Tube 34mm Tube
Low 200 / 200L
.250"
213 / 213L
.250"
220 / 220L
.250"
Medium 201 / 201L
.375"
214 / 214L
.375"
221 / 221L
.375"
High 202 / 202L
.525"
215 / 215L
.525"
222 / 222L
.525"
Extra High 203 / 203L
.650"
216 / 216L
.650"
Not listed
Ultra High 204L
.935"
217L
.850"
Not listed

In the part numbers above, the standard number identifies the fixed ring and the L suffix identifies the Quick Detach version. For example, Warne 201 is a medium fixed ring for a 1-inch scope tube, while 201L is the medium Quick Detach version.

Warne's Maxima chart lists G (Gloss Black), M (Matte Black), and S (Silver) finishes for these rings. Finish availability can vary by model and configuration.

Warne Rings for Ruger Rifles

Warne offers dedicated rings for several Ruger mounting systems, including the Ruger No. 1, Blackhawk, Mini-14, M77, and Hawkeye. These rings have different published heights than the standard Maxima Weaver-style rings.

Ruger No. 1, Blackhawk and Mini-14

Part Number Ring Height Height (RH) Tube Size Mounting Style
1R Medium .460" 1" Fixed
2R High .585" 1" Fixed
14R Medium .460" 30mm Fixed
15R High .585" 30mm Fixed
1RL Medium .460" 1" Quick Detach
2RL High .585" 1" Quick Detach
14RL Medium .460" 30mm Quick Detach
15RL High .585" 30mm Quick Detach

Ruger M77 and Hawkeye

Part Number Ring Height Height (RH) Tube Size Mounting Style
1R7 Medium .460" 1" Fixed
2R7 High .585" 1" Fixed
14R7 Medium .460" 30mm Fixed
15R7 High .585" 30mm Fixed
1R7L Medium .460" 1" Quick Detach
2R7L High .585" 1" Quick Detach
14R7L Medium .460" 30mm Quick Detach
15R7L High .585" 30mm Quick Detach

Ruger-specific rings are designed for their corresponding firearm mounting systems. Do not select these rings based on height alone; confirm that the ring model is intended for your specific Ruger rifle.

Warne Rings for CZ Dovetail Rifles

Warne's chart lists dedicated rings for CZ rifles with 16mm and 19mm dovetail mounting systems. The published heights are different from the standard Maxima Weaver-style ring heights.

CZ 527 – 16mm Dovetail

Part Number Ring Height Height (RH) Tube Size Mounting Style
1B1 Medium .425" 1" Fixed
2B1 High .535" 1" Fixed
14B1 Medium .425" 30mm Fixed
15B1 High .535" 30mm Fixed
1B1L Medium .425" 1" Quick Detach
2B1L High .535" 1" Quick Detach
14B1L Medium .425" 30mm Quick Detach
15B1L High .535" 30mm Quick Detach

CZ 550 – 19mm Dovetail

Part Number Ring Height Height (RH) Tube Size Mounting Style
1B1 Medium .425" 1" Fixed
2B1 High .535" 1" Fixed
14B1 Medium .425" 30mm Fixed
15B1 High .535" 30mm Fixed
1B1L Medium .425" 1" Quick Detach
2B1L High .535" 1" Quick Detach
14B1L Medium .425" 30mm Quick Detach
15B1L High .535" 30mm Quick Detach

Check the firearm's dovetail specification before ordering. A 16mm dovetail and a 19mm dovetail are different mounting dimensions and are not interchangeable simply because the ring height is the same.

Warne Rings for Tikka Rifles

Warne lists dedicated fixed and Quick Detach rings for Tikka rifles. These rings use their own published height measurements.

Part Number Ring Height Height (RH) Tube Size Mounting Style
1T Medium .460" 1" Fixed
2T High .570" 1" Fixed
14T Medium .460" 30mm Fixed
15T High .570" 30mm Fixed
1TL Medium .460" 1" Quick Detach
2TL High .570" 1" Quick Detach
14TL Medium .460" 30mm Quick Detach
15TL High .570" 30mm Quick Detach

Warne Rings for 7.3/22 Dovetail Mounts

Warne's 7.3/22 ring family is listed for 11mm and 3/8-inch dovetail mounting systems. The chart provides medium and high options for 1-inch and 30mm scope tubes.

Part Number Ring Height Height (RH) Tube Size Mounting Style
721 Medium .400" 1" Fixed
722 High .525" 1" Fixed
731 Medium .400" 30mm Fixed
732 High .525" 30mm Fixed
721L Medium .400" 1" Quick Detach
722L High .525" 1" Quick Detach

Confirm whether your firearm uses an 11mm or 3/8-inch dovetail before choosing rings. These mounting dimensions should not be treated as interchangeable without confirmation from the firearm manufacturer.

Warne Tactical Scope Rings

Warne's chart also includes a Tactical ring family. These rings have their own height measurements and are listed in matte black.

Part Number Ring Height Height (RH) Tube Size Mounting Style
601 Medium .440" 1" Fixed
602 High .525" 1" Fixed
603 Extra High .650" 1" Fixed
604 Ultra High .935" 1" Fixed
614 Medium .440" 30mm Fixed
615 High .525" 30mm Fixed
616 Extra High .650" 30mm Fixed
617 Ultra High .850" 30mm Fixed

How to Choose the Correct Scope Ring Height

Use the following considerations when selecting Warne scope rings:

1. Identify the firearm's mounting system

Start by identifying the exact firearm model and the type of base or integral mounting system installed. Warne makes rings for Weaver-style and Picatinny-style bases, Ruger-specific systems, Tikka rifles, CZ dovetails, and other mounting configurations. A ring's height does not establish whether it will fit a particular base.

2. Match the scope tube diameter

Scope rings must match the diameter of the scope's main tube. Common tube diameters include 1 inch, 30mm, and 34mm. These are different sizes and require rings made for the corresponding tube diameter.

3. Check objective bell and barrel clearance

The objective bell is the larger front portion of the riflescope. The selected ring height must provide enough clearance between the objective bell and the barrel, as well as any other firearm components that could interfere with the scope. The amount of clearance needed depends on the scope's objective housing, the firearm, and the base configuration.

4. Consider cheek weld and shooting position

Higher rings can provide additional clearance, but they also raise the scope. A scope mounted unnecessarily high may make it harder to achieve a consistent cheek weld. When the firearm and scope allow it, avoid choosing a taller ring than the setup requires.

5. Confirm the complete ring and base combination

Before ordering, confirm the ring family, tube diameter, mounting interface, height, and fixed or Quick Detach configuration. Do not select a ring based only on a height measurement from a different Warne product family.

Warne Ring Finishes and Part Numbers

Warne uses finish letters at the end of many ring part numbers:

  • G: Gloss Black
  • M: Matte Black
  • S: Silver

For example, a Warne 201M is a matte black version of the 201 ring. The ring number identifies the model and configuration, while the finish letter identifies the finish. Some ring families have more limited finish availability, so check the specific product listing before ordering.

Warne Scope Ring Installation Tips

Warne provides several installation recommendations for its scope rings:

  • Ring screw torque: Warne recommends 25 in/lb for Maxima ring screws. Use an appropriate torque wrench to apply the specified torque.
  • Threadlocker: Warne does not recommend using threadlocker when assembling its rings.
  • Lapping: Warne states that its rings do not need to be lapped when properly installed. If rings appear misaligned, lapping is not a substitute for identifying and correcting the underlying mounting problem.
  • Installation: Follow the instructions supplied with the specific ring and base model. Confirm that the rings are correctly positioned and secured before using the firearm.

Find the Right Warne Scope Rings

Warne offers scope rings for a variety of firearm mounting systems, scope tube diameters, and mounting preferences. Use the height tables in this guide to identify the published ring height, then confirm the part number and mounting configuration for your firearm and scope.

Shop Warne Scope Mounts to find compatible rings and bases for your rifle.