The Warne 732M 30mm high rimfire scope rings mount 30mm riflescopes to 3/8-inch or 11mm dovetail receivers. These fixed steel rings feature a reversible asymmetrical clamp for compatibility with both dovetail widths and a 70/30 horizontal split design for a secure grip on the scope tube. The high profile provides 0.525-inch ring height and accommodates objective lenses in the 42–52mm range, depending on rifle and scope clearance. Finished in matte black, the rings use T-15 Torx fasteners and weigh 4.1 oz per pair. Made in the USA.
The Warne 732M Maxima Rimfire rings provide a fixed mounting solution for riflescopes with 30mm main tubes on rimfire rifles equipped with 3/8-inch or 11mm dovetail receivers. Their reversible asymmetrical steel clamp adapts to either dovetail width, while the 70/30 horizontal split ring design provides a secure hold on the scope tube.
These high rings have a 0.525-inch height and are designed for larger objective scopes in the 42–52mm range. Actual scope clearance depends on the rifle, barrel profile, and scope dimensions, so verify clearance before installation. The steel construction, matte black finish, and compact 1/2-inch ring width make the 732M a durable mounting option for rimfire applications.
The Warne 732M uses a reversible clamp to fit either common rimfire dovetail width. Check the small alignment dot on the side clamp before mounting. With the dot facing up, the clamp is configured for a 3/8-inch dovetail. With the dot facing down, it is configured for an 11mm dovetail. Confirm the receiver's actual dovetail size before installation.
| Manufacturer | Warne |
| Series | Maxima Rimfire |
| Model | 732M |
| Scope Tube Diameter | 30mm |
| Ring Height | High |
| Dimension B | 0.525 inch |
| Objective Size Range | 42–52mm |
| Mounting Platform | 3/8-inch or 11mm dovetail |
| Ring Style | Fixed |
| Ring Design | 70/30 horizontal split |
| Material | Steel |
| Finish | Matte black |
| Ring Width | 1/2 inch |
| Fasteners | T-15 Torx |
| Weight | 4.1 oz per pair |
| Country of Manufacture | USA |
| UPC | 656813104178 |
Verify that the firearm is unloaded before installation. Loosely position the rings and scope on the receiver to check ring spacing and eye relief before final tightening. Warne specifies a maximum torque of 25 in-lb for the dovetail clamp screws and ring cap screws, with dry threads and no thread-locking compound. Follow the scope manufacturer's torque requirements when they specify a lower limit.
The Warne 732M is the high 30mm fixed-ring option in the Maxima Rimfire line. For a medium-height 30mm configuration, the Warne 731M uses a 0.400-inch Dimension B measurement and is intended for smaller objective scopes.