The Warne 731M 30mm medium rimfire scope rings mount riflescopes to 3/8-inch or 11mm dovetail receivers. Designed for rimfire rifles, these fixed steel rings feature a reversible asymmetrical clamp that adjusts to both dovetail widths. The 70/30 horizontal split design provides a secure grip on the scope, while the matte black finish resists wear and corrosion. The medium-height profile accommodates objective lenses up to approximately 42mm. T-15 Torx fasteners secure the rings to the receiver and attach the ring caps. Each pair weighs 3.6 oz. Made in the USA.
The Warne 731M Maxima Rimfire scope rings provide a secure mounting solution for riflescopes with 30mm main tubes on rimfire rifles equipped with either a 3/8-inch or 11mm dovetail receiver. These fixed medium-height rings feature a reversible asymmetrical steel clamp that accommodates both dovetail widths. Their 0.400-inch height provides a practical mounting position for riflescopes with objective lenses in the approximately 20–42mm range.
Warne constructs the 731M from steel with a matte black finish. Its distinctive 70/30 horizontal split design creates a strong grip on the scope while maintaining a compact 1/2-inch ring width. T-15 Torx fasteners secure the rings to the receiver and attach the ring caps. The 731M is sold as a matched pair and made in the USA.
The Warne 731M uses a solid steel asymmetrical reversible clamp that can be flipped 180 degrees to accommodate either a 3/8-inch or 11mm dovetail receiver. This design allows the same ring set to fit two common rimfire receiver widths.
Pay attention to the small orientation dot on the side clamp during installation. With the dot facing up, the rings are configured for a 3/8-inch dovetail. With the dot facing down, they are configured for an 11mm dovetail. The rings attach directly to the rifle's dovetail receiver and do not require a separate Picatinny or Weaver rail.
The 731M is designed specifically for riflescopes with 30mm main tubes. Its medium 0.400-inch ring height accommodates objective lenses up to approximately 42mm, depending on the rifle's barrel, receiver and scope dimensions.
For a 1-inch scope tube, the Warne 721M medium or 722M high rimfire rings provide the corresponding options. The 731M is the 30mm medium-height configuration.
| Manufacturer | Warne |
| Series | Maxima Rimfire |
| Part Number | 731M |
| Scope Tube Diameter | 30mm |
| Ring Height | Medium |
| Ring Height Dimension | 0.400 inch |
| Objective Size | Approximately 20–42mm |
| Mounting Platform | 3/8-inch or 11mm dovetail |
| Ring Style | Fixed |
| Construction | Steel |
| Finish | Matte black |
| Ring Design | 70/30 horizontal split |
| Ring Width | 1/2 inch |
| Fasteners | T-15 Torx |
| Weight | 3.6 oz per pair |
| UPC | 656813104147 |
Before installation, verify that the firearm is completely unloaded. Determine whether the receiver has a 3/8-inch or 11mm dovetail and orient the reversible clamps accordingly. Position the rings on the receiver, install the 30mm riflescope and adjust its position for proper eye relief before tightening the ring caps.
The 70/30 horizontal split design uses one T-15 Torx fastener to secure each ring to the dovetail and two T-15 Torx fasteners to secure each ring cap. Follow the applicable Warne installation instructions and the riflescope manufacturer's torque requirements.