The Warne 722M 1-inch high rimfire scope rings mount riflescopes to 3/8-inch or 11mm dovetail receivers. Designed for .22 caliber rimfire rifles, these fixed steel rings feature a reversible asymmetrical clamp that adjusts to both dovetail widths. The 70/30 horizontal split design provides a secure grip on the scope, while the matte black finish resists wear and corrosion. The high profile accommodates riflescopes with objective lenses up to approximately 52mm. T-15 Torx fasteners secure the rings to the receiver and attach the ring caps. Each pair weighs 3.8 oz. Made in the USA.
The Warne 722M rimfire scope rings provide a secure mounting solution for 1-inch riflescopes on .22 caliber rimfire rifles with either a 3/8-inch or 11mm dovetail receiver. These fixed high rings feature a reversible asymmetrical steel clamp that accommodates both dovetail widths. The high mounting position provides additional clearance for riflescopes with larger objective bells, including optics with objective lenses up to approximately 52mm.
Warne constructs the 722M from steel with a matte black finish. Its 70/30 horizontal split design creates a strong grip on the scope while keeping the rings compact at only 1/2 inch wide. The rings attach directly to the rifle's dovetail receiver using T-15 Torx fasteners and are sold as a matched pair.
The Warne 722M uses an asymmetrical reversible side clamp that can be flipped 180 degrees to accommodate either a 3/8-inch or 11mm dovetail receiver. This design allows one ring set to fit two common rimfire receiver widths. The rings attach directly to the grooved receiver and do not require a separate Picatinny or Weaver rail.
The 722M is the high-height version of Warne's fixed 1-inch rimfire rings. Its 0.525-inch ring height provides additional clearance for larger riflescope objective bells. The recommended objective-size range extends to approximately 52mm, although actual clearance depends on the rifle, barrel profile, receiver and scope dimensions.
For a medium-height 1-inch rimfire ring option, see the Warne 721M. The 722M is the higher configuration for setups requiring additional objective clearance.
| Manufacturer | Warne |
| Series | Maxima Rimfire / 7.3/22 |
| Part Number | 722M |
| Scope Tube Diameter | 1 inch |
| Ring Height | High |
| Ring Height Dimension | 0.525 inch |
| Objective Size | Approximately 42–52mm |
| Mounting Platform | 3/8-inch or 11mm dovetail |
| Ring Style | Fixed |
| Construction | Steel |
| Finish | Matte black |
| Ring Design | 70/30 horizontal split |
| Ring Width | 1/2 inch |
| Fasteners | T-15 Torx |
| Weight | 3.8 oz per pair |
| UPC | 656813001248 |
Before installation, verify that the firearm is completely unloaded. Position the rings on the receiver's dovetail and orient the reversible clamps for the correct dovetail width. Install the riflescope and adjust ring spacing and eye relief before final tightening.
The maximum torque specification for the dovetail clamp screws is 25 in-lb. The maximum torque specification for the ring cap screws is also 25 in-lb, subject to a lower torque requirement from the riflescope manufacturer. These torque specifications apply to dry threads. Do not use thread-locking compound.
Explore additional Warne scope rings and mounting systems, including Maxima and Mountain Tech options. Browse our complete selection of rifle scope rings for other tube diameters, mounting styles and ring heights.