FREE SHIPPING on all US orders over $100!

Same day shipping on orders placed before 3PM Eastern, Monday through Friday

  • New
Warne Rimfire Scope Rings 1 Inch High QD 722LM
search
  • Warne Rimfire Scope Rings 1 Inch High QD 722LM

Warne Rimfire Scope Rings 1 Inch High QD 722LM

$59.99
See our Shipping Policy for details and restrictions.
Out of stock, but more on the way

The Warne 722LM 1-inch high rimfire scope rings mount 1-inch riflescopes to 3/8-inch or 11mm dovetail receivers. These steel Maxima Rimfire rings feature quick-detach levers, a reversible asymmetrical clamp and a 70/30 horizontal split design. The high profile measures 0.525 inch and accommodates objective lenses in the 42–52mm range, depending on rifle and scope clearance. Matte black finish. Each pair weighs 4.3 oz. Made in the USA.

Quantity
Backorder

Warne 722LM 1-Inch High Quick Detach Rimfire Scope Rings

The Warne 722LM Maxima Rimfire scope rings provide a quick-detach mounting solution for 1-inch riflescopes on rimfire rifles with 3/8-inch or 11mm dovetail receivers. The steel rings use a reversible asymmetrical clamp to fit either dovetail width and a 70/30 horizontal split design to secure the scope tube. Quick-detach levers allow the rings and optic to be removed from the receiver and reinstalled when needed.

This high configuration has a 0.525-inch Dimension B measurement and is designed for objective lenses in the approximate 42–52mm range. Actual clearance varies with the rifle, barrel profile and scope dimensions. The rings have a matte black finish and weigh 4.3 oz per pair.

Warne 722LM Rimfire Ring Features

  • Fits 1-inch riflescope main tubes
  • Fits 3/8-inch and 11mm dovetail receivers
  • High ring height; Dimension B: 0.525 inch
  • Approximate objective range: 42–52mm
  • Quick-detach lever mounting system
  • Reversible asymmetrical dovetail clamp
  • 70/30 horizontal split ring design
  • Steel construction with matte black finish
  • T-15 Torx ring-cap fasteners
  • Weight: 4.3 oz per pair
  • Made in the USA

Fitting Warne Rimfire Rings to Your Dovetail

The reversible clamp accommodates either common rimfire dovetail width. Check the small alignment dot on the side clamp: with the dot facing up, the rings are configured for a 3/8-inch dovetail; with the dot facing down, they are configured for an 11mm dovetail. Confirm the receiver's actual dovetail size before installation.

Quick-Detach Operation

The QD levers allow the rings to be detached from the receiver without removing the scope from the rings. When reinstalling, return the rings to their intended position and verify that the scope is secure, the reticle is level and the rifle maintains proper zero before use.

Warne 722LM Specifications

Manufacturer Warne
Series Maxima Rimfire
Model 722LM
Scope Tube Diameter 1 inch
Ring Height High
Dimension B 0.525 inch
Objective Size Range 42–52mm
Mounting Platform 3/8-inch or 11mm dovetail
Mounting Style Quick detach
Ring Design 70/30 horizontal split
Material Steel
Finish Matte black
Fasteners T-15 Torx
Weight 4.3 oz per pair
Country of Manufacture USA

Installation Notes

Verify that the firearm is unloaded before installation. Warne recommends loosely assembling the rings and scope on the firearm first to check eye relief and ring spacing. Tighten the quick-detach levers finger-tight; do not overtighten them. Warne's published maximum for the ring-cap screws is 25 in-lb on dry threads without thread-locking compound. Follow the scope manufacturer's torque requirements if they specify a lower limit.

For a fixed-mount alternative with the same ring height and 1-inch tube fit, see the Warne 722M fixed rimfire scope rings. Browse the full selection in the Warne Rimfire Scope Rings category.

722LM

Specific References

UPC
656813104024
MPN
722LM
Comments (0)
No customer reviews for the moment.