The Warne 721M 1-inch medium rimfire scope rings mount riflescopes to either 3/8-inch or 11mm dovetail receivers. Designed for .22 caliber rimfire rifles, these fixed steel rings feature a reversible asymmetrical side clamp that adjusts to both dovetail widths. The 70/30 horizontal split design provides a secure fit, while the matte black powder-coated finish resists corrosion. T-15 Torx fasteners secure the rings to the receiver and attach the ring caps. Each pair weighs 3.2 oz and accommodates riflescope objectives up to approximately 42mm. Made in the USA.
The Warne 721M rimfire scope rings provide a secure mounting solution for 1-inch riflescopes on .22 caliber rimfire rifles with either a 3/8-inch or 11mm dovetail receiver. These fixed medium-height rings use a reversible asymmetrical steel clamp that accommodates both dovetail widths. Reversing the clamp changes its orientation to match the receiver, making the 721M a versatile option for many rimfire rifles.
Warne builds the 721M from steel with a matte black powder-coated finish. Its distinctive 70/30 horizontal split design keeps the rings compact at only 1/2 inch wide. The rings attach directly to the rifle's dovetail receiver using T-15 Torx fasteners and are sold as a matched pair.
The defining feature of the Warne 721M is its reversible asymmetrical side clamp. The clamp can be flipped 180 degrees to fit either a 3/8-inch or 11mm dovetail receiver. A small orientation indicator on the clamp helps identify the correct position: with the dot facing up, the rings are configured for a 3/8-inch dovetail; with the dot facing down, they are configured for an 11mm dovetail.
These rings attach directly to a compatible dovetail receiver. They are not designed for Picatinny or Weaver rails.
| Manufacturer | Warne |
| Series | 7.3/22 Rimfire |
| Part Number | 721M |
| Scope Tube Diameter | 1 inch |
| Ring Height | Medium |
| Dimension B | 0.400 inch |
| Objective Size | Approximately 20–42mm |
| Mounting Platform | 3/8-inch or 11mm dovetail |
| Ring Style | Fixed |
| Construction | Steel |
| Finish | Matte black powder coat |
| Ring Width | 1/2 inch |
| Ring Design | 70/30 horizontal split |
| Fasteners | T-15 Torx |
| Weight | 3.2 oz per pair |
| UPC | 656813001217 |
Position the rings on the rifle's dovetail receiver with the reversible clamps oriented for the correct dovetail width. The torque specification for the receiver clamp screws is a maximum of 25 in-lb. The maximum torque for the ring cap screws is also 25 in-lb, unless the riflescope manufacturer specifies a lower limit. These torque specifications apply to dry threads. Do not use thread-locking compound.
Before final tightening, position the scope to establish proper eye relief and ensure the objective bell does not contact the barrel or interfere with firearm operation. Follow the riflescope manufacturer's torque requirements when securing the scope in the rings.
The Warne 721M is designed for 1-inch scope tubes and fits both 3/8-inch and 11mm dovetail receivers. It is important to identify the receiver's dovetail width and match the rings to the riflescope tube diameter. For additional mounting options, browse our dovetail scope rings and Warne scope rings. You can also browse all available rifle scope rings.