The EGW 41730 Picatinny Rail is a one-piece 0 MOA scope rail designed specifically for Savage Stevens 320 pump-action shotguns. It provides a full-length Picatinny mounting platform for optics.
| Firearm | Savage Stevens 320 |
| Action | Pump Action |
| MOA | 0 MOA |
| Manufacturer | EGW |
| MPN | 41730 |
See all picatinny rails for Savage Stevens 320
The EGW 41730 is designed specifically for the Savage Stevens 320 pump-action shotgun. Verify the model and receiver mounting pattern before ordering. See our Picatinny Rail Fitment Guide for help identifying the correct rail.
Some Stevens 320 models, particularly Field models, are not drilled and tapped from the factory. Check the top of your receiver for the required mounting holes before ordering. If your receiver is not drilled and tapped, a gunsmith may be required for installation.
The short-action and long-action designations generally apply to centerfire rifles and do not describe the Savage Stevens 320 shotgun. For an explanation of these terms as they apply to rifles, see our guide to short action vs. long action.
The EGW 41730 is a 0 MOA rail. It has no built-in elevation angle and provides a standard Picatinny mounting platform. See our guide to 0 MOA and 20 MOA Picatinny rails for more information about rail cant.
No. Although the Stevens 320 is based on the Winchester 1300 design, EGW recommends using the mount specifically designed for the Winchester 1300 rather than the 41730.
The 41730 is designed for the Savage Stevens 320 platform. Verify the mounting-hole spacing on your particular receiver before installation, especially if you have a less common configuration.
Not sure which rail you need? Use our Picatinny Rail Fitment Guide or contact BJL Outdoors for help selecting the correct rail.