EGW Picatinny Rail for Mauser 98 Large Ring 47000

Other Picatinny Rails for Mauser 98 Large Ring

Other MOA Options

EGW 47000 — 0 MOA
EGW 47002 — 20 MOA

Other Compatible Models

The EGW 47000 is also compatible with several Mauser 98-pattern commercial actions, including FN Mauser, Interarms Mark X, Parker Hale 1200, Santa Barbara Mauser, Zastava M70, Remington 798, JC Higgins Model 50, Herters XK3 and early Ruger M77 rifles. Receiver hole spacing should be verified before installation.

See all picatinny rails for Mauser 98 Large Ring

Picatinny Rail FAQ

What Mauser rifles does the EGW 47000 fit?

The EGW 47000 is designed for Mauser 98 Large Ring actions with the drilled mounting pattern. It also fits several commercial Mauser-pattern actions, but receiver hole spacing should be confirmed before installation.

Is the EGW 47000 a 0 MOA or 20 MOA rail?

The EGW 47000 is a 0 MOA rail. EGW offers a 20 MOA version for applications requiring additional built-in elevation. See our guide to 0 MOA vs. 20 MOA Picatinny rails.

Does the EGW 47000 fit the Mauser 98 Large Ring Military Action?

No. The BJL Outdoors fitment guide lists the EGW 47020 separately for the Mauser 98 Large Ring Military Action. The military-action receiver should not be assumed to use the 47000. See our Picatinny Rail Fitment Guide.

What is the center hole spacing on the EGW 47000?

The EGW 47000 has a 3.825-inch center spread, measured between the two middle receiver holes. EGW recommends confirming your receiver's hole spacing before installation.

What is the difference between a Mauser 98 Large Ring and other Mauser actions?

Mauser actions use different receiver dimensions and mounting-hole patterns. Do not select a rail based only on the Mauser name; verify the exact action and receiver pattern. For general action-length information, see What’s the Difference Between Short Action and Long Action?

What screws are included with the EGW 47000?

The 47000 includes #6-48 x 1/4-inch screws and a T-10 bit. EGW recommends 20 in/lbs of torque and a small amount of blue Loctite during installation.

Not sure which rail you need? Use our Picatinny Rail Fitment Guide or contact BJL Outdoors for help selecting the correct rail.