EGW Picatinny Rail for Sako TRG 44100

Other Picatinny Rails for Sako TRG & M995

Other MOA Options

Talley P20252152 — 20 MOA
Talley P28252152 — 28 MOA
Talley P45252152 — 45 MOA

Other Manufacturers

Warne M678M
EGW 81030

See all picatinny rails for Sako TRG & M995

Picatinny Rail FAQ

What rifles does the EGW 44100 fit?

The EGW 44100 fits Sako TRG and M995 rifles. EGW recommends confirming the receiver hole spacing before installation. See our Picatinny Rail Fitment Guide.

Is the EGW 44100 a 0 MOA or 20 MOA rail?

The 44100 is a 0 MOA rail. If you are deciding between a flat rail and a canted rail, see our guide to 0 MOA vs. 20 MOA Picatinny rails.

What is the difference between the EGW 44100 and 81030?

Both are listed for Sako TRG and M995 rifles. The 44100 is EGW's standard-duty 0 MOA rail, while the 81030 is an HD rail. Verify the specifications and receiver fitment before selecting between them.

What other MOA options are available for the Sako TRG?

BJL Outdoors also lists Talley rails for the Sako TRG in 20, 28 and 45 MOA configurations. Your choice of MOA depends on the scope's adjustment range and intended shooting distance.

Do I need a short-action or long-action Picatinny rail?

The Sako TRG and M995 use their own specific receiver mounting pattern, so conventional short-action versus long-action rail terminology does not determine the 44100 fit. For a general explanation of action length, see What’s the Difference Between Short Action and Long Action?

What mounting hardware is included?

EGW specifies hex-head mounting screws and a wrench with the 44100. The published specifications list 3.5 x .6 mm mounting hardware, and EGW recommends 20 in/lbs of torque for installation.

Not sure which rail you need? Use our Picatinny Rail Fitment Guide or contact BJL Outdoors for help selecting the correct rail.