EGW Picatinny Rail for Browning A-Bolt Long Action 20 MOA 43102

Other Picatinny Rails for Browning A-Bolt

Other MOA Options

EGW 43100 — 0 MOA

Other Manufacturers

Talley PL0252000 — 0 MOA
Talley PLM252000 — 20 MOA

See all picatinny rails for Browning A-Bolt

Picatinny Rail FAQ

What Browning rifles does the EGW 43102 fit?

The EGW 43102 is designed for Browning A-Bolt and A-Bolt II Long Action rifles. It does not fit the Browning AB3 or X-Bolt. See our Picatinny Rail Fitment Guide for help identifying the correct rail.

Is the EGW 43102 for a short action or long action?

The EGW 43102 is specifically for the Browning A-Bolt Long Action. If you have a Short Action A-Bolt, use a Short Action rail instead. Learn more about short action vs. long action.

What is the difference between the EGW 43100 and 43102?

The EGW 43100 has 0 MOA of built-in elevation, while the EGW 43102 has 20 MOA. See our guide to 0 MOA vs. 20 MOA Picatinny rails.

Will the EGW 43102 fit a Browning AB3?

No. The Browning AB3 uses a different receiver and mounting pattern. The EGW 43102 is designed for the standard A-Bolt and A-Bolt II.

Will the EGW 43102 fit a Browning X-Bolt?

No. The X-Bolt uses a different receiver and mounting pattern and requires an X-Bolt-specific Picatinny rail.

Will the EGW 43102 fit the A-Bolt Mountain Titanium in .300 WSM?

No. EGW specifically states that this mount is not compatible with the Browning A-Bolt Mountain Titanium in .300 WSM.

What screws does the EGW 43102 use?

The EGW 43102 uses #6-48 x 1/4-inch mounting screws and includes a T-10 bit. EGW recommends 20 in/lbs of torque for installation.

Not sure which rail you need? Use our Picatinny Rail Fitment Guide or contact BJL Outdoors for help selecting the correct rail.