EGW Picatinny Rail for Winchester 1300 and SXP 42500

Other Picatinny Rails for Winchester 1300 & SXP

Other Compatible Models

The EGW 42500 also fits the FN SLP when the mount is drilled for #8 screws. EGW recommends measuring the receiver hole spacing before installation to confirm compatibility.

See all picatinny rails for Winchester 1300

Picatinny Rail FAQ

How do I know which Picatinny rail fits my Winchester 1300 or SXP?

The EGW 42500 is designed for the Winchester 1300 and SXP Super X Pump. Verify the firearm model and receiver mounting-hole spacing before ordering. See our Picatinny Rail Fitment Guide for help identifying the correct rail.

Will the EGW 42500 fit both the Winchester 1300 and SXP?

Yes. EGW lists both the Winchester 1300 and SXP as compatible with the 42500. The rail uses a 2.49" center spread, so receiver hole spacing should be verified before installation.

Does the EGW 42500 fit the FN SLP?

EGW lists the FN SLP as compatible, but the mount must be drilled for #8 screws. Verify the receiver configuration before installation.

Is the EGW 42500 a short-action or long-action rail?

Short-action and long-action designations generally apply to centerfire rifles and do not describe the Winchester 1300 or SXP pump-action shotgun. For an explanation of these terms as they apply to rifles, see our guide to short action vs. long action.

Is the EGW 42500 a 0 MOA or 20 MOA rail?

The EGW 42500 is a 0 MOA rail with no built-in elevation. See our guide to 0 MOA and 20 MOA Picatinny rails for more information about rail cant and scope adjustment.

Does the EGW 42500 include mounting screws?

Yes. EGW includes #6-48 x 1/4" screws and a T-10 bit with the 42500. EGW recommends 20 in/lbs of torque for installation.

Not sure which rail you need? Use our Picatinny Rail Fitment Guide or contact BJL Outdoors for help selecting the correct rail.