EGW Picatinny Rail for Browning Lever Action Short Action 43600

Other Picatinny Rails for Browning BLR

Other Action Lengths

EGW 43500 — Long Action

Other Compatible Models

The EGW 43600 also fits Browning BLR Takedown rifles. EGW notes that older BLR rifles may use the long-action rail despite their caliber, so measuring the receiver hole spacing is recommended before ordering.

See all picatinny rails for Browning BLR

Picatinny Rail FAQ

What Browning rifles does the EGW 43600 fit?

The EGW 43600 is designed for Browning BLR Short Action rifles and BLR Takedown models. See our Picatinny Rail Fitment Guide for help identifying the correct rail.

Is the EGW 43600 for a short action or long action?

The EGW 43600 is the Short Action BLR rail. Older BLR rifles may use the long-action rail regardless of caliber, so measuring the receiver hole spacing is recommended. Learn more about short action vs. long action.

What is the difference between the EGW 43600 and 43500?

The EGW 43600 is the Short Action BLR rail, while the EGW 43500 is the Long Action configuration. Older BLR rifles should be checked by receiver hole spacing rather than caliber alone.

Is the EGW 43600 0 MOA or 20 MOA?

The EGW 43600 provides 0 MOA of built-in elevation. See our guide to 0 MOA vs. 20 MOA Picatinny rails when choosing your rail.

Does the EGW 43600 fit a Browning BLR Takedown?

Yes. EGW specifically lists the BLR Takedown as compatible with the 43600. The current version has an overall length of 5.094 inches, which was changed to accommodate Takedown models.

What screws does the EGW 43600 use?

The EGW 43600 uses #6-48 x 1/4-inch mounting screws and includes a T-10 bit. EGW recommends 20 in/lbs of torque for installation.

Not sure which rail you need? Use our Picatinny Rail Fitment Guide or contact BJL Outdoors for help selecting the correct rail.