The EGW 44002 Picatinny Rail is a 20 MOA scope rail for Tikka T3 and T3x rifles. It provides a full-length Picatinny mounting platform and built-in elevation for extended-range scope adjustment.
| Rifle | Tikka T3, T3x |
| MOA | 20 MOA |
| Manufacturer | EGW |
| MPN | 44002 |
When will this item ship?
Talley P00252714 — 0 MOA
Talley P0M252714 — 20 MOA
Warne 76T3M
DNZ Scope Mounts PR050 — 0 MOA
DNZ Scope Mounts PR0502 — 20 MOA
See all picatinny rails for Tikka T3 & T3x
The EGW 44002 is designed for standard Tikka T3 and T3x rifles. EGW lists models including the T3 Lite, T3 Varmint, T3 Hunter and multiple T3x configurations as compatible. See our Picatinny Rail Fitment Guide for additional fitment information.
The EGW 44002 provides 20 MOA of built-in elevation. EGW recommends 20 MOA when dialing for longer-range shooting. See our guide to 0 MOA vs. 20 MOA Picatinny rails.
The EGW 44000 is the 0 MOA version, while the EGW 44002 provides 20 MOA of built-in elevation. Both are designed for Tikka T3 and T3x rifles.
Yes. EGW lists the 44002 for both Tikka T3 and T3x rifles. Standard T3 and T3x models share the same mounting spacing.
No. The T1x uses a different mounting configuration and requires a T1x-specific rail. The BJL compatibility guide lists separate EGW rails for the T1x.
The standard 44002 is not the dedicated TAC A1 rail. EGW offers separate TAC A1 rails for that platform, including 20 MOA and 30 MOA configurations.
The 44002 includes #6-48 mounting screws and a T-10 bit. Tikka rifles produced before 2004 may require metric screws, so verify your rifle's receiver threads before installation.
Tikka T3 and T3x rifles use the same receiver mounting spacing across their standard calibers, so the EGW 44002 is not selected by conventional short-action or long-action rail dimensions. See our guide to short action vs. long action.
Not sure which rail you need? Use our Picatinny Rail Fitment Guide or contact BJL Outdoors for help selecting the correct rail.