Warne Maxima 2BLM scope rings are 1-inch high quick-detach rings designed for CZ 550 rifles with 19mm integral dovetail receivers. These solid steel rings attach directly to the receiver without a separate mounting base and provide a 0.535-inch mounting height for scopes with objectives up to 52mm. Indexable QD levers allow the scope to be removed and reattached while maintaining zero. A CZ-specific recoil key helps secure each ring to the receiver. Matte black finish.
Warne Maxima 2BLM scope rings provide a direct-fit mounting solution for 1-inch riflescopes on CZ 550 rifles with 19mm integral dovetail receivers. These high-profile quick-detach rings attach directly to the receiver, eliminating the need for a separate scope base.
The quick-detach system uses Warne's indexable lever design, allowing the scope and rings to be removed and reinstalled while maintaining zero. The levers can be repositioned after installation to provide clearance and a convenient operating position. Solid steel construction, a CZ-specific recoil key and four T-15 Torx screws per ring provide a secure mounting platform.
| Manufacturer | Warne |
| Model | 2BLM |
| Series | Maxima |
| Scope Tube Diameter | 1 inch |
| Ring Height | High |
| Mounting Height | 0.535 inch |
| Maximum Objective Diameter | 52mm |
| Firearm Compatibility | CZ 550 with 19mm integral dovetail |
| Mounting Style | Quick Detach |
| Material | Steel |
| Finish | Matte Black |
| Weight | 6.7 oz per pair |
| Screw Type | T-15 Torx |
| UPC | 656813010479 |
| Country of Manufacture | USA |
The Warne QD lever system allows the scope to be removed for cleaning, storage or use with another optic. The indexable levers can be repositioned after installation so they do not interfere with other rifle components. Warne guarantees return to zero when the rings are properly installed and reattached.
These rings are machined specifically for the CZ 550's 19mm integral receiver dovetail. They attach directly to the receiver without a separate mounting base. A CZ-specific recoil key engages the receiver dovetail to help prevent movement under recoil.
The 0.535-inch mounting height provides additional clearance for riflescopes with objectives up to 52mm. Always verify clearance between the objective bell, barrel and other rifle components before finalizing scope installation.