EGW Picatinny Rail for Tikka 595 44020

Other Picatinny Rails for Tikka 595

See all picatinny rails for Tikka 595

Picatinny Rail FAQ

What rifle does the EGW 44020 fit?

The EGW 44020 is designed specifically for the Tikka 595. The BJL Outdoors fitment guide lists the 44020 as the compatible Picatinny rail for this model. See our Picatinny Rail Fitment Guide for additional Tikka rail options.

Is the EGW 44020 a 0 MOA or 20 MOA rail?

The EGW 44020 is a 0 MOA rail. EGW recommends 0 MOA for typical shooting distances and offers 20 MOA rails for applications requiring additional scope elevation adjustment. See our guide to 0 MOA vs. 20 MOA Picatinny rails.

Does the EGW 44020 fit the Tikka T3 or T3x?

No. The 44020 is specifically made for the Tikka 595. Tikka T3 and T3x rifles use different rails, including the EGW 44000 and 44002.

Does the EGW 44020 require drilling or tapping?

No. EGW states that the 44020 is made specifically for the Tikka 595 and recommends measuring the receiver hole spacing to confirm that it matches the published dimensions before installation.

What are the dimensions of the EGW 44020?

The rail has a 3.865-inch center spread and 7.458-inch overall length. It is approximately 0.4 inches high from the top of the receiver to the top of the Picatinny rail.

What screws does the EGW 44020 use?

The EGW 44020 uses #6-48 x 1/4-inch mounting screws and includes a T-10 bit. EGW recommends 20 in/lbs of torque and a small amount of blue Loctite during installation.

Do short-action and long-action dimensions matter for the Tikka 595?

The EGW 44020 is selected specifically by the Tikka 595 receiver mounting pattern rather than by conventional short-action or long-action rail sizing. For a general explanation of action lengths, see our guide to short action vs. long action.

Not sure which rail you need? Use our Picatinny Rail Fitment Guide or contact BJL Outdoors for help selecting the correct rail.