Tech Sights Savage Mark II Replacement Sights SAV200

These Savage Mark II replacement sights are windage and elevation adjustable and fits all Savage Mark II rifles drilled and tapped for scope mounts.  The SAV200 features a rear sight assembly with elevation adjustable aperture with detent stops, as well as a front sight tower and post.

• GI type post and aperture sight picture.
• Increases sight radius by 7.25.
• Includes front and rear sight.
• Rear sight Windage Elevation adjustable with detent locking.
• Easy installation with no drilling or tapping required.

Installation

1. Make sure the firearm is unloaded with magazine removed.  Lock the bolt in the open position.  Never install sights on a loaded firearm.
2. Remove the factory front sight by using a punch to drive the blade from the dovetail slot (left to right).
3. Apply thread locker to the dovetail slot in the barrel.
4. Slide or tap the lock block into the barrel dovetail slot until it is centered.
5. Apply a drop of thread locker to the threaded hole in the dovetail lock block.
6. Use a 6-48 screw (included) to attach the front sight assembly to the dovetail lock block and tighten.
7. Apply thread locker to the rear sight adapter block screws, and attach the block to the action.
8. Apply thread locker to the threads on the rear lock block assembly.  
9. Place the rear sight on the adapter block, insert the lock block assembly, and apply retaining nut.
10. Move the rear sight assembly to the desired position, and tighten the retaining nut.  The rear sight should be securely attached to the adapter plate.
11. Enjoy shooting your upgraded rifle.

Shipping Tech Sights to Canada

We do ship Tech Sights for Savage MK II to Canada, please view our page on Shipping Tech Sights to Canada for more information.