FREE SHIPPING on all US orders over $100!

Same day shipping on orders placed before 3PM Eastern, Monday through Friday

# Burris Fullfield 4-16x50 vs. 6-24x50: Which Rifle Scope Is Better for Precision Shooting? The Burris Fullfield 4-16x50 and Fullfield 6-24x50 share a 50mm objective lens and side-focus parallax adjustment, but they serve somewhat different shooting priorities. The 4-16x50 offers a broader magnification range for field use, while the 6-24x50 is optimized for higher-magnification shooting, where target detail and precise aiming matter more than a wide field of view. The technical differences extend beyond magnification. The 6-24x50 uses a 30mm main tube instead of the 4-16x50's 1-inch tube, has a narrower field of view, a smaller exit pupil at maximum power, and different elevation and windage adjustment specifications. Reticle selection is another important consideration: the available options are not identical between the two models. This comparison examines the specifications that matter most to experienced hunters and shooters, with an emphasis on how each difference affects practical performance, mounting, and use at the range or in the field.

Burris Fullfield 4-16x50 vs. 6-24x50: Specifications

Both scopes use rear focal plane reticles, 1/4 MOA adjustment clicks, and side-focus parallax adjustment. Their main differences are magnification, main tube diameter, field of view, reticle availability, and adjustment range.

Specification Fullfield 4-16x50 Fullfield 6-24x50
Magnification 4-16x 6-24x
Objective lens diameter 50mm 50mm
Main tube diameter 1 inch 30mm
Field of view at 100 yards 27 ft. at 4x; 6.75 ft. at 16x 17 ft. at 6x; 4.8 ft. at 24x
Eye relief 3.7-4.2 inches 3.8-4.1 inches
Exit pupil 10.0mm at 4x; 3.8mm at 16x 8.5mm at 6x; 2.9mm at 24x
Reticle plane Rear focal plane Rear focal plane
Parallax adjustment Side focus, 25 yards to infinity Side focus, 25 yards to infinity
Click value 1/4 MOA 1/4 MOA
Total elevation adjustment 54 MOA 64 MOA
Total windage adjustment 54 MOA 50 MOA
Length 12.3 inches 14.4 inches
Weight 17.7-18.2 ounces 18.9 ounces
Reticle options Ballistic E3 Illuminated, Wind Ret, Plex Ballistic E3
Illuminated reticle Available on selected configuration Not listed on current item 201560

*Specifications reflect the current Fullfield models listed by Burris. Reticle options, turret configurations, and weights can vary by item number and production generation. Confirm the exact product specifications before purchasing.*

Magnification Range and Target Detail

The 4-16x50 provides a 4x minimum and 16x maximum magnification. The 6-24x50 starts at 6x and reaches 24x. Both offer a 4x zoom ratio, but the entire range of the 6-24x50 is shifted toward higher magnification. At equal target distance, 24x makes the target appear 50% larger in angular size than 16x. That extra magnification can make small aiming points easier to resolve and help a shooter distinguish details on a distant target. The practical benefit depends on the target, conditions, and support. At 24x, mirage, atmospheric distortion, and movement from the rifle or shooting position become more conspicuous. On a stable bench or other solid rest, the additional power can be useful. From an unsupported or improvised field position, it may magnify movement without producing a meaningful improvement in shot placement.

Why the 4-16x50 Can Be More Versatile

The 4-16x50 starts at 4x rather than 6x. That lower minimum magnification offers a wider field of view and makes it easier to maintain a broad view of the terrain. For hunting in mixed terrain, shooting at changing distances, or using one rifle for both field and range work, the lower starting power provides greater flexibility. It also allows the shooter to back off magnification when mirage or an unstable position makes the highest setting counterproductive.

When 24x Is Worth Having

The 6-24x50 is the stronger choice when the shooting application consistently benefits from additional target detail. Examples include paper-target shooting, varmint shooting from a supported position, and evaluating small aiming points at longer distances. The extra magnification does not extend a rifle's effective range by itself. Wind estimation, ballistic data, ammunition consistency, and the shooter's ability to build a repeatable position remain decisive. The advantage is that the scope gives the shooter more visual detail when conditions support its use.

Field of View at Higher Magnification

Field of view is one of the clearest practical differences between these models. Burris lists the 4-16x50 at 27 feet at 100 yards on 4x and 6.75 feet on 16x. The 6-24x50 provides 17 feet on 6x and 4.8 feet on 24x. At their respective maximum settings, the 6-24x50 shows a narrower portion of the scene. This is the expected trade-off for the higher magnification, not necessarily an indication of inferior optical quality. For precision shooting at a known target, the narrower view may be entirely acceptable. For locating targets across varied terrain, tracking movement, or quickly reacquiring a target after recoil, the 4-16x50's broader field of view can be more practical. One useful operating approach is to use the lower end of the magnification range to locate and acquire the target, then increase power as needed for a stable aiming position. The 4-16x50 has an advantage when the target may be relatively close; the 6-24x50 is designed around applications where higher magnification is more consistently useful.

1-Inch vs. 30mm Main Tube

The Fullfield 4-16x50 uses a 1-inch main tube, while the Fullfield 6-24x50 uses a 30mm tube. This is a meaningful mounting and compatibility difference.

Ring and Base Compatibility

The two scopes do not use the same nominal ring diameter. The 4-16x50 requires rings designed for a 1-inch tube, while the 6-24x50 requires 30mm rings. Existing rings should not be reused unless their diameter matches the new scope. The larger tube does not mean that a scope automatically gathers more light or produces a sharper image. Optical performance depends on the complete optical design. A 30mm tube provides a larger internal tube diameter, which can allow a different mechanical design and may support greater adjustment capability in some scope designs. Actual usable elevation travel still depends on the specific model. In this case, the published total elevation adjustment is 64 MOA for the 6-24x50 and 54 MOA for the 4-16x50. That is a measurable difference, but it should not be attributed to tube diameter alone.

Mounting Height and Objective Clearance

Both scopes use a nominal 50mm objective lens, but the external dimensions of the objective housing and the scope's overall geometry determine ring height and clearance. Before choosing a mounting system, check the objective bell against the barrel and base, verify that the eyepiece clears the action, and confirm that the scope can be positioned to provide proper eye alignment. The 6-24x50 is also longer, so its mounting position and available rail space deserve attention.

Side-Focus Parallax Adjustment

Both models include side-focus parallax adjustment with a listed range of 25 yards to infinity. This makes parallax adjustment a shared feature rather than a reason to choose one over the other. The practical distinction is how often the shooter is likely to use high magnification and how precisely the target distance needs to be set. At 24x, apparent reticle movement caused by parallax is easier to notice, particularly when aiming at small targets. Side focus allows the shooter to adjust the optical system for the target distance and reduce that apparent movement. For target shooting at varied distances, the 6-24x50's combination of high magnification and side focus is useful. The 4-16x50 offers the same basic parallax adjustment capability while retaining a broader low-power field of view. Side focus should be adjusted for the target distance and verified through the sight picture. A sharp-looking image alone does not guarantee that parallax has been eliminated, and consistent eye position remains important.

Exit Pupil and High-Power Performance

Because both scopes use a 50mm objective, their exit pupil is primarily affected by magnification. The 4-16x50 has a listed exit pupil of 3.8mm at 16x, while the 6-24x50 drops to 2.9mm at 24x. The smaller exit pupil at 24x makes eye alignment less forgiving and gives the eye less room to move while maintaining a full sight picture. This can matter when shooting from field positions rather than a bench, especially if head position varies between shots. The 6-24x50's lower listed exit pupil at maximum power also means it may be less comfortable to use at 24x in dim conditions. Backing down magnification increases exit pupil and can make the sight picture easier to acquire. Neither scope's objective diameter alone determines low-light performance. Optical transmission, coatings, image contrast, and the surrounding light all matter. The practical takeaway is that the 4-16x50 retains more exit pupil at its maximum magnification, while the 6-24x50 trades some viewing tolerance for additional target detail.

Elevation and Windage Adjustment Travel

Both models use 1/4 MOA clicks, but their published total adjustment ranges differ:

  • Fullfield 4-16x50: 54 MOA elevation and 54 MOA windage.
  • Fullfield 6-24x50: 64 MOA elevation and 50 MOA windage.

The 6-24x50 offers 10 MOA more total elevation travel, which can provide additional flexibility when zeroing or making elevation corrections. The 4-16x50 offers 4 MOA more total windage travel. Total adjustment travel is not the same as usable adjustment remaining after zeroing. The amount available in a particular direction depends on the scope's mechanical center, the rifle's mounting geometry, and the position of the zero. A canted base or other mounting solution may be relevant for applications that require more elevation adjustment, but the correct setup depends on the rifle and intended use. The click value is identical on both scopes. At 100 yards, a 1/4 MOA click corresponds to approximately 0.26 inches of movement at the target; at 200 yards, approximately 0.52 inches. The same click value does not mean the turrets have the same total range or configuration. For shooters who dial elevation, the 6-24x50's additional listed elevation travel may be useful. However, the reticle and turret system also matter: a shooter who uses reticle holds may prioritize reticle layout over total mechanical travel.

Reticle Options and Their Applications

Reticle choice is a major differentiator between these scopes. The current Fullfield 4-16x50 is offered with Ballistic E3 Illuminated, Wind Ret, and Plex configurations. The current Fullfield 6-24x50 listing, item 201560, uses the Ballistic E3 reticle.

Ballistic E3

The Ballistic E3 is a rear focal plane reticle with additional aiming references designed to support holdover and wind-hold estimates. Burris describes the lower vertical references as corresponding approximately to 200, 300, and 400 yards with a 100-yard zero for representative ammunition, while the cascading dots provide estimated wind holds for a representative 10 mph crosswind. These are starting references, not universal ballistic solutions. Actual trajectory and wind drift depend on the cartridge, bullet, muzzle velocity, atmospheric conditions, sight-in distance, and other factors. Shooters should verify their load's trajectory and wind holds rather than assume that the reticle markings correspond exactly to a particular distance. The Ballistic E3 on the 6-24x50 provides a straightforward option for shooters who prefer a familiar hunting-style ballistic reticle rather than a more densely marked precision grid.

Wind Ret

The Wind Ret option on the 4-16x50 provides symmetrical MOA wind-hold reference marks, allowing the shooter to dial elevation and use the reticle for wind corrections. This can be useful when the shooter prefers a reticle designed around measured angular holds rather than relying only on a simple crosshair. The value of those references depends on understanding the reticle's subtensions and using the correct magnification for the reticle's calibration. Since these Fullfield scopes use rear focal plane reticles, reticle dimensions remain the same in the eyepiece as magnification changes; the target image changes size. Any holdover or ranging assumptions must account for the reticle's specified calibration.

Plex

The Plex is a traditional crosshair with thicker outer posts leading toward a finer central aiming area. It provides a less cluttered sight picture and is suitable for shooters who prefer to dial their corrections or use a simpler aiming reference. The Plex option is available on the 4-16x50, but not listed for the current 6-24x50 item 201560. If a specific reticle layout is essential, check the exact item number before selecting the scope.

Illumination

The 4-16x50 Ballistic E3 configuration is illuminated, while the current 6-24x50 Ballistic E3 configuration is listed as non-illuminated. Illumination can make the central aiming point easier to distinguish against dark or complex backgrounds, but it does not brighten the overall image. If illumination is a requirement, the currently listed configurations favor the 4-16x50. If it is not needed, the 6-24x50's non-illuminated Ballistic E3 may be a good fit for a dedicated range or precision setup.

Mounting, Weight, and Rifle Balance

The Fullfield 4-16x50 measures approximately 12.3 inches and weighs 17.7-18.2 ounces, depending on configuration. The Fullfield 6-24x50 measures 14.4 inches and weighs 18.9 ounces in the current listing. The 6-24x50 is about 2.1 inches longer and roughly 0.7-1.2 ounces heavier than the 4-16x50. The weight difference is relatively modest, but the extra length can affect mounting position and rifle balance. The 30mm tube also means the 6-24x50 requires a different set of rings. For a dedicated range rifle, the additional length and higher magnification may be acceptable. For a hunting rifle carried over long distances, the 4-16x50's shorter body and broader magnification range may be more convenient.

Which Scope Fits Your Shooting Style?

Choose the Burris Fullfield 4-16x50 If...

  • You want a broad enough magnification range for both field use and supported shooting.
  • You value a wider field of view and a lower minimum magnification.
  • You want the option of an illuminated Ballistic E3 reticle or a Wind Ret configuration.
  • You prefer a 1-inch tube and already have compatible mounting hardware.
  • You want side-focus parallax adjustment without moving to a 24x maximum magnification.

Choose the Burris Fullfield 6-24x50 If...

  • You regularly shoot small targets from a stable position and benefit from 24x magnification.
  • You want 10 MOA more total elevation adjustment than the 4-16x50 provides.
  • You prefer the current Ballistic E3 reticle configuration.
  • You are comfortable with a narrower field of view and smaller exit pupil at maximum power.
  • You are setting up a dedicated range, varmint, or precision-oriented rifle and can accommodate a 30mm tube.

Final Verdict: Fullfield 4-16x50 or 6-24x50?

The Burris Fullfield 4-16x50 is the more versatile choice for shooters who need a scope that can transition between field use and precision work. Its lower minimum magnification, wider field of view, larger exit pupil at maximum power, and available reticle configurations make it adaptable to a broader range of situations. The Burris Fullfield 6-24x50 is the more specialized option for shooters who regularly use high magnification. Its 24x maximum power, 30mm main tube, and additional total elevation adjustment are useful features for supported shooting and applications where small target details matter. The trade-offs are a narrower field of view, a smaller exit pupil at maximum magnification, a longer scope body, and fewer reticle choices in the current listing. For mixed field and range use, the 4-16x50 is likely the better fit. For a rifle primarily dedicated to higher-magnification precision shooting, the 6-24x50 deserves a closer look. The best choice depends on whether the extra magnification is something you will use regularly or merely have available.

Frequently Asked Questions

What is the main difference between the Burris Fullfield 4-16x50 and 6-24x50?

The 4-16x50 offers a 4-16x magnification range and a 1-inch tube, while the 6-24x50 reaches 24x and uses a 30mm tube. The 6-24x50 also has a narrower field of view and more total elevation adjustment travel in the current specifications.

Is 24x magnification worth it over 16x?

It can be worthwhile when shooting small targets from a stable position or when additional target detail is important. It is less beneficial when mirage, movement, or a narrow field of view makes high magnification difficult to use. For mixed hunting and range use, 16x may already provide sufficient detail.

Do both Burris Fullfield scopes have side-focus parallax adjustment?

Yes. Both current models list side-focus parallax adjustment from 25 yards to infinity. This lets the shooter adjust for different target distances, which is especially useful when using higher magnification.

Does a 30mm tube make the 6-24x50 brighter?

No, not by itself. Tube diameter is primarily a mechanical and optical-design dimension. Image brightness depends on the objective, magnification, coatings, glass, and the complete optical system. The two scopes both have a 50mm objective.

Can I use the same scope rings for both models?

No, not if the rings are sized specifically for one tube diameter. The 4-16x50 uses a 1-inch tube, while the 6-24x50 uses a 30mm tube. Choose rings with the correct diameter and height for the scope and rifle.

Which scope has more elevation adjustment?

The current Fullfield 6-24x50 lists 64 MOA of total elevation adjustment, compared with 54 MOA for the 4-16x50. The 4-16x50 lists 54 MOA of windage adjustment, compared with 50 MOA for the 6-24x50. Usable travel after zeroing depends on the mounting setup and the scope's actual zero position.

Does the Fullfield 6-24x50 have an illuminated reticle?

The current Fullfield 6-24x50 listing, item 201560, specifies a non-illuminated Ballistic E3 reticle. The Fullfield 4-16x50 is available with an illuminated Ballistic E3 configuration. Verify current availability and item numbers before ordering.

Which scope is better for long-range shooting?

The 6-24x50 is generally the better fit when the application regularly benefits from 24x magnification and additional elevation adjustment. The 4-16x50 can still be suitable for longer-range use, especially when a wider field of view and more flexible magnification range are important. Neither scope's magnification alone determines effective range or accuracy.